Does the shape of a die affect the probability of a number being rolled? Announcing the arrival of Valued Associate #679: Cesar Manara Planned maintenance scheduled April 17/18, 2019 at 00:00UTC (8:00pm US/Eastern)3d6 vs a d20: What is the effect of a different probability curve?What is the probability for a thousand with 3 D10Dice pool success probability with one exploding dieImproving “fumbles” when using pools dice in TROS, part 2Does the chance of rolling a 1 in a pool of d10s increase as the number of dice increases?Help with probability for a complicated dice pool mechanicHow can I calculate the probability of being able to purchase a card in my custom die system?I need a dice system with a unique behavior and rate of growth (preferably in ANYDICE to verify)Converting this action resolution mechanic from total rolled to highest die rolledHow to calculate Yahtzee-like probability without too much by-hand work
Is there a kind of relay only consumes power when switching?
How to tell that you are a giant?
How come Sam didn't become Lord of Horn Hill?
First console to have temporary backward compatibility
What would be the ideal power source for a cybernetic eye?
An adverb for when you're not exaggerating
Compare a given version number in the form major.minor.build.patch and see if one is less than the other
Can a new player join a group only when a new campaign starts?
old style "caution" boxes
Chinese Seal on silk painting - what does it mean?
Significance of Cersei's obsession with elephants?
Generate an RGB colour grid
How to find all the available tools in mac terminal?
Denied boarding although I have proper visa and documentation. To whom should I make a complaint?
Using et al. for a last / senior author rather than for a first author
また usage in a dictionary
Is there any way for the UK Prime Minister to make a motion directly dependent on Government confidence?
Should I use a zero-interest credit card for a large one-time purchase?
What is homebrew?
Is it cost-effective to upgrade an old-ish Giant Escape R3 commuter bike with entry-level branded parts (wheels, drivetrain)?
What's the meaning of "fortified infraction restraint"?
Why wasn't DOSKEY integrated with COMMAND.COM?
Is it a good idea to use CNN to classify 1D signal?
What does the "x" in "x86" represent?
Does the shape of a die affect the probability of a number being rolled?
Announcing the arrival of Valued Associate #679: Cesar Manara
Planned maintenance scheduled April 17/18, 2019 at 00:00UTC (8:00pm US/Eastern)3d6 vs a d20: What is the effect of a different probability curve?What is the probability for a thousand with 3 D10Dice pool success probability with one exploding dieImproving “fumbles” when using pools dice in TROS, part 2Does the chance of rolling a 1 in a pool of d10s increase as the number of dice increases?Help with probability for a complicated dice pool mechanicHow can I calculate the probability of being able to purchase a card in my custom die system?I need a dice system with a unique behavior and rate of growth (preferably in ANYDICE to verify)Converting this action resolution mechanic from total rolled to highest die rolledHow to calculate Yahtzee-like probability without too much by-hand work
.everyoneloves__top-leaderboard:empty,.everyoneloves__mid-leaderboard:empty,.everyoneloves__bot-mid-leaderboard:empty margin-bottom:0;
$begingroup$
Let's say I have a standard D4 and a custom D8 that has printed 1-4 and then 1-4 again (for a total of 8 sides).
Would both of these dice distribute the probably of rolling any given number equally?
I noticed recently that the D4 is really the only dice that doesn't "roll" and I am curious if this actually affects the probability of rolling a given number.
I am considering buying a custom D8 as described if nothing else because I hate trying to pick up D4s, but I wanted to make sure that the probability of rolling X is still the same before purchasing. I wouldn't want any form of advantage when rolling.
Because the D4 kind of just falls into positions, does that lower my chances of rolling X on generic dice? IMO the D8 should increase my probability of rolling X because the D8 can roll after it hits the surface. So any weight inconsistencies wont matter as much as the D4 where the heavy side fall first and because the bottom is complete flat, I would be less likely to roll anything that is not "the heavy side".
dice statistics
$endgroup$
add a comment |
$begingroup$
Let's say I have a standard D4 and a custom D8 that has printed 1-4 and then 1-4 again (for a total of 8 sides).
Would both of these dice distribute the probably of rolling any given number equally?
I noticed recently that the D4 is really the only dice that doesn't "roll" and I am curious if this actually affects the probability of rolling a given number.
I am considering buying a custom D8 as described if nothing else because I hate trying to pick up D4s, but I wanted to make sure that the probability of rolling X is still the same before purchasing. I wouldn't want any form of advantage when rolling.
Because the D4 kind of just falls into positions, does that lower my chances of rolling X on generic dice? IMO the D8 should increase my probability of rolling X because the D8 can roll after it hits the surface. So any weight inconsistencies wont matter as much as the D4 where the heavy side fall first and because the bottom is complete flat, I would be less likely to roll anything that is not "the heavy side".
dice statistics
$endgroup$
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
add a comment |
$begingroup$
Let's say I have a standard D4 and a custom D8 that has printed 1-4 and then 1-4 again (for a total of 8 sides).
Would both of these dice distribute the probably of rolling any given number equally?
I noticed recently that the D4 is really the only dice that doesn't "roll" and I am curious if this actually affects the probability of rolling a given number.
I am considering buying a custom D8 as described if nothing else because I hate trying to pick up D4s, but I wanted to make sure that the probability of rolling X is still the same before purchasing. I wouldn't want any form of advantage when rolling.
Because the D4 kind of just falls into positions, does that lower my chances of rolling X on generic dice? IMO the D8 should increase my probability of rolling X because the D8 can roll after it hits the surface. So any weight inconsistencies wont matter as much as the D4 where the heavy side fall first and because the bottom is complete flat, I would be less likely to roll anything that is not "the heavy side".
dice statistics
$endgroup$
Let's say I have a standard D4 and a custom D8 that has printed 1-4 and then 1-4 again (for a total of 8 sides).
Would both of these dice distribute the probably of rolling any given number equally?
I noticed recently that the D4 is really the only dice that doesn't "roll" and I am curious if this actually affects the probability of rolling a given number.
I am considering buying a custom D8 as described if nothing else because I hate trying to pick up D4s, but I wanted to make sure that the probability of rolling X is still the same before purchasing. I wouldn't want any form of advantage when rolling.
Because the D4 kind of just falls into positions, does that lower my chances of rolling X on generic dice? IMO the D8 should increase my probability of rolling X because the D8 can roll after it hits the surface. So any weight inconsistencies wont matter as much as the D4 where the heavy side fall first and because the bottom is complete flat, I would be less likely to roll anything that is not "the heavy side".
dice statistics
dice statistics
edited Apr 10 at 13:30
Bloodcinder
24.2k390145
24.2k390145
asked Apr 10 at 11:40
SaggingRufusSaggingRufus
2,61621833
2,61621833
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
add a comment |
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
add a comment |
6 Answers
6
active
oldest
votes
$begingroup$
Statistically speaking, the probabilities of a d4 aren't affected by the shape, i.e. whether it's 4-sided, 8-sided, 12-sided etc.
This is basic statistic knowledge, but you can alternatively also verify it using sites such as anydice.com. See Sdjz's answer for details.
In real-world terms, ignoring statistics, the shape of your "d4" won't affect the result either, assuming that you use e.g. a dice shaker. If you roll with your hands only, though, it is easier to cheat with a standard d4 as opposed to 8- or more-sided d4s.
This is basic logic - if you try to throw a die in a certain way so that it lands on a specific number, you will have an easier time the fewer times the dice rolls / the fewer sides it has. Therefore, it's easier to cheat with a 4-sided d4 as opposed to an 8- or 12-sided d4, and it would be easier to cheat with a 20-sided d20 than with an 80-sided one.
Even if you don't intend to cheat, 8- or 12-sided d4s are probably a good choice.
Why, you ask? Because 4-sided d4s, especially metal ones, are notoriously murderous weapons of deadly vicious torturous vile evil death, and are probably better of being called carpet caltrops (credit goes to Korvin Starmast). These little f***ers are worse than Legos Lego bricks.
For illustration, I found the following image of a d4 on boardgamegeek.com:
I don't personally have d4s with more than 4 sides, since I have pretty cool metal d4s with rounded corners that are not as murderous. However, a few of my fellow players have 12-sided d4s, which can be found here.
Note: I am not in any way affiliated with the linked shop, nor do I mean to advertise it (in fact, their 12-sided d4 are about their only item I would buy). It's just that, in my experience, it's not easy to find 12-sided d4 at all, and this site has them, so I want to save OP (and others) the time in finding them.
$endgroup$
add a comment |
$begingroup$
D4's don't really "roll" which has always been a puzzle
There are a couple of ways around this, which include the d8 idea that you have, and the more "rolly" d12 approach which can be applied in two different ways.
- Get a custom d12 from a place like this (I have no affiliation
with that site, but I just ordered some thanks to PixelMaster's
link). Those only come up with a 1-4 result. - Use a d12 and divide the result by 3, rounding up. As was shown for the d8 example by @Sdjz, the stats side of this works out.
Experience with d4 disdain (aka avoiding the Carpet Caltrops)
I have had a number of players and DM's, over the years, prefer method 2 due to how that pyramid shaped carpet caltrop of death, aka the d4, doesn't roll. It also got us rolling our d12's since they don't get a lot of love in general but we had bought them with the pack.
We had a player in the 90's who hated the d4 shape - possibly for similar reasons expressed in your question - who rolled a d20 and divided by 5, rounding up. The mental math isn't hard. It worked, but as often as a d20 gets rolled already, my preference for a sub was the d12 as explained in item 2.
We had one DM in the 80's who insisted that for a d4 we hold it by the top, and toss it into the air so that it would spin, before falling. I recommend against that, thougH. If you have a large area to roll dice that can work out, but at a typical table that led to a "flying d4" problem that could knock over minis or bounce off of things and onto the floor. (And then there's the old "you'll put someone's eye out!" problem with an over exuberant tossing moment).
The "roll a rollier die" solution was generally more satisfying. Dice shaker cups (as @PixelMaster pointed out) can also help with 'rolling' the d4. @HeyICanChan pointed to another "custom" option here. (No affiliation with that site either).
$endgroup$
add a comment |
$begingroup$
Such a custom d8 is statistically equivalent to a d4
Assuming that the d8 is fair, the odds of getting each result are 1/8. Since each number (1-4) appears twice in the custom d8, the probability of rolling each of the numbers is 1/8 + 1/8 = 1/4 which is the same as in a normal fair d4.
You can also see this anydice program that illustrates this:
output 1d4 named "normal d4"
output 1,1,2,2,3,3,4,4 named "custom d8"
$endgroup$
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
add a comment |
$begingroup$
Theoretically not, but
how the dice rolls is an important factor in randomization.
There is an excellent numberphile video where a mathematician explain the factors that lead to a dice being biased or not.
A summary of the video: There are many factors that contribute to randomization of dice results and the more of them are present in a roll, the better (or more random) are the results. If a dice doesn't roll you get a less random result. So you will probably have a small bias towards some numbers because of your individual way of throwing a dice.
If you want to know the details it's best if you watch the video.
$endgroup$
$begingroup$
Having watched both video parts again, there is an important factor worth noting which is only mentioned in passing in the videos: the density of the finished dice is uniform or is geometrically similar; a different material density could significantly affect the resulting probability.
$endgroup$
– FluxIX
Apr 10 at 15:31
add a comment |
$begingroup$
The probabilities of getting various values with dice can't be proved statistically. Statistical calculations assume things about these probabilities. The probabilities are what they are because of physics and symmetry.
IIRC there is a user on here named "seven-sided die." With all due respect to this user, the ... er ... typical dice we use are either regular polyhedra or shapes with almost as much symmetry as regular polyhedra. If you have such a die with no markings or etched numbers on it, then any face is equivalent to any other face, in the sense that you can rotate the die so that face A comes on top of face B, and when you have done so, the new state of the unmarked die is indistinguishable from the old state. The new surface coincides with the old surface, the center of mass is in the same place, and so on.
This symmetry implies that if you pick up the die without paying any attention to its orientation, and then throw it, then any initial throw you do is no more or less likely than any other throw in which the die has been reoriented to have B in place of A. Even if the way you throw is not random (e.g., you always throw your d6 from a certain orientation, with 5 on top), the physics of rolling dice is that the motion is exponentially sensitive to the initial conditions, so your choice doesn't actually influence the probabilities. There are a lot of processes that are random for this reason, including weather (on long time scales) or the fall of a pencil balanced on its tip.
This sensitivity to initial conditions could fail if the die doesn't really roll well, and that would be a reason not to use four-sided dice. (Or you could just make a habit of shaking them in your hand.) But the issue would be that a player could cheat, not that the die would intrinsically favor one side over the other if the player is honest.
Sagging Rufus wrote:
Because the D4 kind of just falls into positions, does that lower my chances of rolling X on generic dice?
If you pick up the d4 without looking at it or intentionally trying to orient it in a particular way, then by symmetry, for any motion you could trace out that leads to rolling 1, you would have some other motion that would lead to rolling 2. By symmetry, these initial conditions would be equally likely, and therefore the final results would be equally likely.
$endgroup$
add a comment |
$begingroup$
The "fairness" of dice can be divided into two factors. The fairness of the throw, and the fairness of the dice themselves.
If the dice themselves aren't fair then it makes a difference. So pragmatically yes there is a difference between a D4 and a D8. The more faces and the more edges the greater probability of having a geometric defect in manufacturing.
New contributor
$endgroup$
$begingroup$
Welcome to RPG.SE! Take the tour if you haven't already, and check out the help center for more guidance. Can you elaborate on your answer and support your claims by citing evidence?
$endgroup$
– V2Blast
Apr 11 at 5:10
$begingroup$
@V2Blast - For manufacturing problems see for instance youtube.com/watch?v=MRzg_M8pQms // Fair roll? - To prevent some rolling techniques is why gamblers must bounce the dice of the wall when playing craps.
$endgroup$
– MaxW
Apr 11 at 5:17
$begingroup$
Please edit that information into your answer. :)
$endgroup$
– V2Blast
Apr 11 at 5:44
add a comment |
Your Answer
StackExchange.ready(function()
var channelOptions =
tags: "".split(" "),
id: "122"
;
initTagRenderer("".split(" "), "".split(" "), channelOptions);
StackExchange.using("externalEditor", function()
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled)
StackExchange.using("snippets", function()
createEditor();
);
else
createEditor();
);
function createEditor()
StackExchange.prepareEditor(
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader:
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
,
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
);
);
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2frpg.stackexchange.com%2fquestions%2f144936%2fdoes-the-shape-of-a-die-affect-the-probability-of-a-number-being-rolled%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
6 Answers
6
active
oldest
votes
6 Answers
6
active
oldest
votes
active
oldest
votes
active
oldest
votes
$begingroup$
Statistically speaking, the probabilities of a d4 aren't affected by the shape, i.e. whether it's 4-sided, 8-sided, 12-sided etc.
This is basic statistic knowledge, but you can alternatively also verify it using sites such as anydice.com. See Sdjz's answer for details.
In real-world terms, ignoring statistics, the shape of your "d4" won't affect the result either, assuming that you use e.g. a dice shaker. If you roll with your hands only, though, it is easier to cheat with a standard d4 as opposed to 8- or more-sided d4s.
This is basic logic - if you try to throw a die in a certain way so that it lands on a specific number, you will have an easier time the fewer times the dice rolls / the fewer sides it has. Therefore, it's easier to cheat with a 4-sided d4 as opposed to an 8- or 12-sided d4, and it would be easier to cheat with a 20-sided d20 than with an 80-sided one.
Even if you don't intend to cheat, 8- or 12-sided d4s are probably a good choice.
Why, you ask? Because 4-sided d4s, especially metal ones, are notoriously murderous weapons of deadly vicious torturous vile evil death, and are probably better of being called carpet caltrops (credit goes to Korvin Starmast). These little f***ers are worse than Legos Lego bricks.
For illustration, I found the following image of a d4 on boardgamegeek.com:
I don't personally have d4s with more than 4 sides, since I have pretty cool metal d4s with rounded corners that are not as murderous. However, a few of my fellow players have 12-sided d4s, which can be found here.
Note: I am not in any way affiliated with the linked shop, nor do I mean to advertise it (in fact, their 12-sided d4 are about their only item I would buy). It's just that, in my experience, it's not easy to find 12-sided d4 at all, and this site has them, so I want to save OP (and others) the time in finding them.
$endgroup$
add a comment |
$begingroup$
Statistically speaking, the probabilities of a d4 aren't affected by the shape, i.e. whether it's 4-sided, 8-sided, 12-sided etc.
This is basic statistic knowledge, but you can alternatively also verify it using sites such as anydice.com. See Sdjz's answer for details.
In real-world terms, ignoring statistics, the shape of your "d4" won't affect the result either, assuming that you use e.g. a dice shaker. If you roll with your hands only, though, it is easier to cheat with a standard d4 as opposed to 8- or more-sided d4s.
This is basic logic - if you try to throw a die in a certain way so that it lands on a specific number, you will have an easier time the fewer times the dice rolls / the fewer sides it has. Therefore, it's easier to cheat with a 4-sided d4 as opposed to an 8- or 12-sided d4, and it would be easier to cheat with a 20-sided d20 than with an 80-sided one.
Even if you don't intend to cheat, 8- or 12-sided d4s are probably a good choice.
Why, you ask? Because 4-sided d4s, especially metal ones, are notoriously murderous weapons of deadly vicious torturous vile evil death, and are probably better of being called carpet caltrops (credit goes to Korvin Starmast). These little f***ers are worse than Legos Lego bricks.
For illustration, I found the following image of a d4 on boardgamegeek.com:
I don't personally have d4s with more than 4 sides, since I have pretty cool metal d4s with rounded corners that are not as murderous. However, a few of my fellow players have 12-sided d4s, which can be found here.
Note: I am not in any way affiliated with the linked shop, nor do I mean to advertise it (in fact, their 12-sided d4 are about their only item I would buy). It's just that, in my experience, it's not easy to find 12-sided d4 at all, and this site has them, so I want to save OP (and others) the time in finding them.
$endgroup$
add a comment |
$begingroup$
Statistically speaking, the probabilities of a d4 aren't affected by the shape, i.e. whether it's 4-sided, 8-sided, 12-sided etc.
This is basic statistic knowledge, but you can alternatively also verify it using sites such as anydice.com. See Sdjz's answer for details.
In real-world terms, ignoring statistics, the shape of your "d4" won't affect the result either, assuming that you use e.g. a dice shaker. If you roll with your hands only, though, it is easier to cheat with a standard d4 as opposed to 8- or more-sided d4s.
This is basic logic - if you try to throw a die in a certain way so that it lands on a specific number, you will have an easier time the fewer times the dice rolls / the fewer sides it has. Therefore, it's easier to cheat with a 4-sided d4 as opposed to an 8- or 12-sided d4, and it would be easier to cheat with a 20-sided d20 than with an 80-sided one.
Even if you don't intend to cheat, 8- or 12-sided d4s are probably a good choice.
Why, you ask? Because 4-sided d4s, especially metal ones, are notoriously murderous weapons of deadly vicious torturous vile evil death, and are probably better of being called carpet caltrops (credit goes to Korvin Starmast). These little f***ers are worse than Legos Lego bricks.
For illustration, I found the following image of a d4 on boardgamegeek.com:
I don't personally have d4s with more than 4 sides, since I have pretty cool metal d4s with rounded corners that are not as murderous. However, a few of my fellow players have 12-sided d4s, which can be found here.
Note: I am not in any way affiliated with the linked shop, nor do I mean to advertise it (in fact, their 12-sided d4 are about their only item I would buy). It's just that, in my experience, it's not easy to find 12-sided d4 at all, and this site has them, so I want to save OP (and others) the time in finding them.
$endgroup$
Statistically speaking, the probabilities of a d4 aren't affected by the shape, i.e. whether it's 4-sided, 8-sided, 12-sided etc.
This is basic statistic knowledge, but you can alternatively also verify it using sites such as anydice.com. See Sdjz's answer for details.
In real-world terms, ignoring statistics, the shape of your "d4" won't affect the result either, assuming that you use e.g. a dice shaker. If you roll with your hands only, though, it is easier to cheat with a standard d4 as opposed to 8- or more-sided d4s.
This is basic logic - if you try to throw a die in a certain way so that it lands on a specific number, you will have an easier time the fewer times the dice rolls / the fewer sides it has. Therefore, it's easier to cheat with a 4-sided d4 as opposed to an 8- or 12-sided d4, and it would be easier to cheat with a 20-sided d20 than with an 80-sided one.
Even if you don't intend to cheat, 8- or 12-sided d4s are probably a good choice.
Why, you ask? Because 4-sided d4s, especially metal ones, are notoriously murderous weapons of deadly vicious torturous vile evil death, and are probably better of being called carpet caltrops (credit goes to Korvin Starmast). These little f***ers are worse than Legos Lego bricks.
For illustration, I found the following image of a d4 on boardgamegeek.com:
I don't personally have d4s with more than 4 sides, since I have pretty cool metal d4s with rounded corners that are not as murderous. However, a few of my fellow players have 12-sided d4s, which can be found here.
Note: I am not in any way affiliated with the linked shop, nor do I mean to advertise it (in fact, their 12-sided d4 are about their only item I would buy). It's just that, in my experience, it's not easy to find 12-sided d4 at all, and this site has them, so I want to save OP (and others) the time in finding them.
edited Apr 11 at 12:02
answered Apr 10 at 12:45
PixelMasterPixelMaster
13.4k350123
13.4k350123
add a comment |
add a comment |
$begingroup$
D4's don't really "roll" which has always been a puzzle
There are a couple of ways around this, which include the d8 idea that you have, and the more "rolly" d12 approach which can be applied in two different ways.
- Get a custom d12 from a place like this (I have no affiliation
with that site, but I just ordered some thanks to PixelMaster's
link). Those only come up with a 1-4 result. - Use a d12 and divide the result by 3, rounding up. As was shown for the d8 example by @Sdjz, the stats side of this works out.
Experience with d4 disdain (aka avoiding the Carpet Caltrops)
I have had a number of players and DM's, over the years, prefer method 2 due to how that pyramid shaped carpet caltrop of death, aka the d4, doesn't roll. It also got us rolling our d12's since they don't get a lot of love in general but we had bought them with the pack.
We had a player in the 90's who hated the d4 shape - possibly for similar reasons expressed in your question - who rolled a d20 and divided by 5, rounding up. The mental math isn't hard. It worked, but as often as a d20 gets rolled already, my preference for a sub was the d12 as explained in item 2.
We had one DM in the 80's who insisted that for a d4 we hold it by the top, and toss it into the air so that it would spin, before falling. I recommend against that, thougH. If you have a large area to roll dice that can work out, but at a typical table that led to a "flying d4" problem that could knock over minis or bounce off of things and onto the floor. (And then there's the old "you'll put someone's eye out!" problem with an over exuberant tossing moment).
The "roll a rollier die" solution was generally more satisfying. Dice shaker cups (as @PixelMaster pointed out) can also help with 'rolling' the d4. @HeyICanChan pointed to another "custom" option here. (No affiliation with that site either).
$endgroup$
add a comment |
$begingroup$
D4's don't really "roll" which has always been a puzzle
There are a couple of ways around this, which include the d8 idea that you have, and the more "rolly" d12 approach which can be applied in two different ways.
- Get a custom d12 from a place like this (I have no affiliation
with that site, but I just ordered some thanks to PixelMaster's
link). Those only come up with a 1-4 result. - Use a d12 and divide the result by 3, rounding up. As was shown for the d8 example by @Sdjz, the stats side of this works out.
Experience with d4 disdain (aka avoiding the Carpet Caltrops)
I have had a number of players and DM's, over the years, prefer method 2 due to how that pyramid shaped carpet caltrop of death, aka the d4, doesn't roll. It also got us rolling our d12's since they don't get a lot of love in general but we had bought them with the pack.
We had a player in the 90's who hated the d4 shape - possibly for similar reasons expressed in your question - who rolled a d20 and divided by 5, rounding up. The mental math isn't hard. It worked, but as often as a d20 gets rolled already, my preference for a sub was the d12 as explained in item 2.
We had one DM in the 80's who insisted that for a d4 we hold it by the top, and toss it into the air so that it would spin, before falling. I recommend against that, thougH. If you have a large area to roll dice that can work out, but at a typical table that led to a "flying d4" problem that could knock over minis or bounce off of things and onto the floor. (And then there's the old "you'll put someone's eye out!" problem with an over exuberant tossing moment).
The "roll a rollier die" solution was generally more satisfying. Dice shaker cups (as @PixelMaster pointed out) can also help with 'rolling' the d4. @HeyICanChan pointed to another "custom" option here. (No affiliation with that site either).
$endgroup$
add a comment |
$begingroup$
D4's don't really "roll" which has always been a puzzle
There are a couple of ways around this, which include the d8 idea that you have, and the more "rolly" d12 approach which can be applied in two different ways.
- Get a custom d12 from a place like this (I have no affiliation
with that site, but I just ordered some thanks to PixelMaster's
link). Those only come up with a 1-4 result. - Use a d12 and divide the result by 3, rounding up. As was shown for the d8 example by @Sdjz, the stats side of this works out.
Experience with d4 disdain (aka avoiding the Carpet Caltrops)
I have had a number of players and DM's, over the years, prefer method 2 due to how that pyramid shaped carpet caltrop of death, aka the d4, doesn't roll. It also got us rolling our d12's since they don't get a lot of love in general but we had bought them with the pack.
We had a player in the 90's who hated the d4 shape - possibly for similar reasons expressed in your question - who rolled a d20 and divided by 5, rounding up. The mental math isn't hard. It worked, but as often as a d20 gets rolled already, my preference for a sub was the d12 as explained in item 2.
We had one DM in the 80's who insisted that for a d4 we hold it by the top, and toss it into the air so that it would spin, before falling. I recommend against that, thougH. If you have a large area to roll dice that can work out, but at a typical table that led to a "flying d4" problem that could knock over minis or bounce off of things and onto the floor. (And then there's the old "you'll put someone's eye out!" problem with an over exuberant tossing moment).
The "roll a rollier die" solution was generally more satisfying. Dice shaker cups (as @PixelMaster pointed out) can also help with 'rolling' the d4. @HeyICanChan pointed to another "custom" option here. (No affiliation with that site either).
$endgroup$
D4's don't really "roll" which has always been a puzzle
There are a couple of ways around this, which include the d8 idea that you have, and the more "rolly" d12 approach which can be applied in two different ways.
- Get a custom d12 from a place like this (I have no affiliation
with that site, but I just ordered some thanks to PixelMaster's
link). Those only come up with a 1-4 result. - Use a d12 and divide the result by 3, rounding up. As was shown for the d8 example by @Sdjz, the stats side of this works out.
Experience with d4 disdain (aka avoiding the Carpet Caltrops)
I have had a number of players and DM's, over the years, prefer method 2 due to how that pyramid shaped carpet caltrop of death, aka the d4, doesn't roll. It also got us rolling our d12's since they don't get a lot of love in general but we had bought them with the pack.
We had a player in the 90's who hated the d4 shape - possibly for similar reasons expressed in your question - who rolled a d20 and divided by 5, rounding up. The mental math isn't hard. It worked, but as often as a d20 gets rolled already, my preference for a sub was the d12 as explained in item 2.
We had one DM in the 80's who insisted that for a d4 we hold it by the top, and toss it into the air so that it would spin, before falling. I recommend against that, thougH. If you have a large area to roll dice that can work out, but at a typical table that led to a "flying d4" problem that could knock over minis or bounce off of things and onto the floor. (And then there's the old "you'll put someone's eye out!" problem with an over exuberant tossing moment).
The "roll a rollier die" solution was generally more satisfying. Dice shaker cups (as @PixelMaster pointed out) can also help with 'rolling' the d4. @HeyICanChan pointed to another "custom" option here. (No affiliation with that site either).
edited Apr 10 at 14:20
answered Apr 10 at 12:36
KorvinStarmastKorvinStarmast
84.2k20262457
84.2k20262457
add a comment |
add a comment |
$begingroup$
Such a custom d8 is statistically equivalent to a d4
Assuming that the d8 is fair, the odds of getting each result are 1/8. Since each number (1-4) appears twice in the custom d8, the probability of rolling each of the numbers is 1/8 + 1/8 = 1/4 which is the same as in a normal fair d4.
You can also see this anydice program that illustrates this:
output 1d4 named "normal d4"
output 1,1,2,2,3,3,4,4 named "custom d8"
$endgroup$
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
add a comment |
$begingroup$
Such a custom d8 is statistically equivalent to a d4
Assuming that the d8 is fair, the odds of getting each result are 1/8. Since each number (1-4) appears twice in the custom d8, the probability of rolling each of the numbers is 1/8 + 1/8 = 1/4 which is the same as in a normal fair d4.
You can also see this anydice program that illustrates this:
output 1d4 named "normal d4"
output 1,1,2,2,3,3,4,4 named "custom d8"
$endgroup$
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
add a comment |
$begingroup$
Such a custom d8 is statistically equivalent to a d4
Assuming that the d8 is fair, the odds of getting each result are 1/8. Since each number (1-4) appears twice in the custom d8, the probability of rolling each of the numbers is 1/8 + 1/8 = 1/4 which is the same as in a normal fair d4.
You can also see this anydice program that illustrates this:
output 1d4 named "normal d4"
output 1,1,2,2,3,3,4,4 named "custom d8"
$endgroup$
Such a custom d8 is statistically equivalent to a d4
Assuming that the d8 is fair, the odds of getting each result are 1/8. Since each number (1-4) appears twice in the custom d8, the probability of rolling each of the numbers is 1/8 + 1/8 = 1/4 which is the same as in a normal fair d4.
You can also see this anydice program that illustrates this:
output 1d4 named "normal d4"
output 1,1,2,2,3,3,4,4 named "custom d8"
edited Apr 10 at 11:49
answered Apr 10 at 11:43
SdjzSdjz
14.1k468114
14.1k468114
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
add a comment |
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago
add a comment |
$begingroup$
Theoretically not, but
how the dice rolls is an important factor in randomization.
There is an excellent numberphile video where a mathematician explain the factors that lead to a dice being biased or not.
A summary of the video: There are many factors that contribute to randomization of dice results and the more of them are present in a roll, the better (or more random) are the results. If a dice doesn't roll you get a less random result. So you will probably have a small bias towards some numbers because of your individual way of throwing a dice.
If you want to know the details it's best if you watch the video.
$endgroup$
$begingroup$
Having watched both video parts again, there is an important factor worth noting which is only mentioned in passing in the videos: the density of the finished dice is uniform or is geometrically similar; a different material density could significantly affect the resulting probability.
$endgroup$
– FluxIX
Apr 10 at 15:31
add a comment |
$begingroup$
Theoretically not, but
how the dice rolls is an important factor in randomization.
There is an excellent numberphile video where a mathematician explain the factors that lead to a dice being biased or not.
A summary of the video: There are many factors that contribute to randomization of dice results and the more of them are present in a roll, the better (or more random) are the results. If a dice doesn't roll you get a less random result. So you will probably have a small bias towards some numbers because of your individual way of throwing a dice.
If you want to know the details it's best if you watch the video.
$endgroup$
$begingroup$
Having watched both video parts again, there is an important factor worth noting which is only mentioned in passing in the videos: the density of the finished dice is uniform or is geometrically similar; a different material density could significantly affect the resulting probability.
$endgroup$
– FluxIX
Apr 10 at 15:31
add a comment |
$begingroup$
Theoretically not, but
how the dice rolls is an important factor in randomization.
There is an excellent numberphile video where a mathematician explain the factors that lead to a dice being biased or not.
A summary of the video: There are many factors that contribute to randomization of dice results and the more of them are present in a roll, the better (or more random) are the results. If a dice doesn't roll you get a less random result. So you will probably have a small bias towards some numbers because of your individual way of throwing a dice.
If you want to know the details it's best if you watch the video.
$endgroup$
Theoretically not, but
how the dice rolls is an important factor in randomization.
There is an excellent numberphile video where a mathematician explain the factors that lead to a dice being biased or not.
A summary of the video: There are many factors that contribute to randomization of dice results and the more of them are present in a roll, the better (or more random) are the results. If a dice doesn't roll you get a less random result. So you will probably have a small bias towards some numbers because of your individual way of throwing a dice.
If you want to know the details it's best if you watch the video.
edited Apr 10 at 12:55
answered Apr 10 at 12:46
CKACKA
356110
356110
$begingroup$
Having watched both video parts again, there is an important factor worth noting which is only mentioned in passing in the videos: the density of the finished dice is uniform or is geometrically similar; a different material density could significantly affect the resulting probability.
$endgroup$
– FluxIX
Apr 10 at 15:31
add a comment |
$begingroup$
Having watched both video parts again, there is an important factor worth noting which is only mentioned in passing in the videos: the density of the finished dice is uniform or is geometrically similar; a different material density could significantly affect the resulting probability.
$endgroup$
– FluxIX
Apr 10 at 15:31
$begingroup$
Having watched both video parts again, there is an important factor worth noting which is only mentioned in passing in the videos: the density of the finished dice is uniform or is geometrically similar; a different material density could significantly affect the resulting probability.
$endgroup$
– FluxIX
Apr 10 at 15:31
$begingroup$
Having watched both video parts again, there is an important factor worth noting which is only mentioned in passing in the videos: the density of the finished dice is uniform or is geometrically similar; a different material density could significantly affect the resulting probability.
$endgroup$
– FluxIX
Apr 10 at 15:31
add a comment |
$begingroup$
The probabilities of getting various values with dice can't be proved statistically. Statistical calculations assume things about these probabilities. The probabilities are what they are because of physics and symmetry.
IIRC there is a user on here named "seven-sided die." With all due respect to this user, the ... er ... typical dice we use are either regular polyhedra or shapes with almost as much symmetry as regular polyhedra. If you have such a die with no markings or etched numbers on it, then any face is equivalent to any other face, in the sense that you can rotate the die so that face A comes on top of face B, and when you have done so, the new state of the unmarked die is indistinguishable from the old state. The new surface coincides with the old surface, the center of mass is in the same place, and so on.
This symmetry implies that if you pick up the die without paying any attention to its orientation, and then throw it, then any initial throw you do is no more or less likely than any other throw in which the die has been reoriented to have B in place of A. Even if the way you throw is not random (e.g., you always throw your d6 from a certain orientation, with 5 on top), the physics of rolling dice is that the motion is exponentially sensitive to the initial conditions, so your choice doesn't actually influence the probabilities. There are a lot of processes that are random for this reason, including weather (on long time scales) or the fall of a pencil balanced on its tip.
This sensitivity to initial conditions could fail if the die doesn't really roll well, and that would be a reason not to use four-sided dice. (Or you could just make a habit of shaking them in your hand.) But the issue would be that a player could cheat, not that the die would intrinsically favor one side over the other if the player is honest.
Sagging Rufus wrote:
Because the D4 kind of just falls into positions, does that lower my chances of rolling X on generic dice?
If you pick up the d4 without looking at it or intentionally trying to orient it in a particular way, then by symmetry, for any motion you could trace out that leads to rolling 1, you would have some other motion that would lead to rolling 2. By symmetry, these initial conditions would be equally likely, and therefore the final results would be equally likely.
$endgroup$
add a comment |
$begingroup$
The probabilities of getting various values with dice can't be proved statistically. Statistical calculations assume things about these probabilities. The probabilities are what they are because of physics and symmetry.
IIRC there is a user on here named "seven-sided die." With all due respect to this user, the ... er ... typical dice we use are either regular polyhedra or shapes with almost as much symmetry as regular polyhedra. If you have such a die with no markings or etched numbers on it, then any face is equivalent to any other face, in the sense that you can rotate the die so that face A comes on top of face B, and when you have done so, the new state of the unmarked die is indistinguishable from the old state. The new surface coincides with the old surface, the center of mass is in the same place, and so on.
This symmetry implies that if you pick up the die without paying any attention to its orientation, and then throw it, then any initial throw you do is no more or less likely than any other throw in which the die has been reoriented to have B in place of A. Even if the way you throw is not random (e.g., you always throw your d6 from a certain orientation, with 5 on top), the physics of rolling dice is that the motion is exponentially sensitive to the initial conditions, so your choice doesn't actually influence the probabilities. There are a lot of processes that are random for this reason, including weather (on long time scales) or the fall of a pencil balanced on its tip.
This sensitivity to initial conditions could fail if the die doesn't really roll well, and that would be a reason not to use four-sided dice. (Or you could just make a habit of shaking them in your hand.) But the issue would be that a player could cheat, not that the die would intrinsically favor one side over the other if the player is honest.
Sagging Rufus wrote:
Because the D4 kind of just falls into positions, does that lower my chances of rolling X on generic dice?
If you pick up the d4 without looking at it or intentionally trying to orient it in a particular way, then by symmetry, for any motion you could trace out that leads to rolling 1, you would have some other motion that would lead to rolling 2. By symmetry, these initial conditions would be equally likely, and therefore the final results would be equally likely.
$endgroup$
add a comment |
$begingroup$
The probabilities of getting various values with dice can't be proved statistically. Statistical calculations assume things about these probabilities. The probabilities are what they are because of physics and symmetry.
IIRC there is a user on here named "seven-sided die." With all due respect to this user, the ... er ... typical dice we use are either regular polyhedra or shapes with almost as much symmetry as regular polyhedra. If you have such a die with no markings or etched numbers on it, then any face is equivalent to any other face, in the sense that you can rotate the die so that face A comes on top of face B, and when you have done so, the new state of the unmarked die is indistinguishable from the old state. The new surface coincides with the old surface, the center of mass is in the same place, and so on.
This symmetry implies that if you pick up the die without paying any attention to its orientation, and then throw it, then any initial throw you do is no more or less likely than any other throw in which the die has been reoriented to have B in place of A. Even if the way you throw is not random (e.g., you always throw your d6 from a certain orientation, with 5 on top), the physics of rolling dice is that the motion is exponentially sensitive to the initial conditions, so your choice doesn't actually influence the probabilities. There are a lot of processes that are random for this reason, including weather (on long time scales) or the fall of a pencil balanced on its tip.
This sensitivity to initial conditions could fail if the die doesn't really roll well, and that would be a reason not to use four-sided dice. (Or you could just make a habit of shaking them in your hand.) But the issue would be that a player could cheat, not that the die would intrinsically favor one side over the other if the player is honest.
Sagging Rufus wrote:
Because the D4 kind of just falls into positions, does that lower my chances of rolling X on generic dice?
If you pick up the d4 without looking at it or intentionally trying to orient it in a particular way, then by symmetry, for any motion you could trace out that leads to rolling 1, you would have some other motion that would lead to rolling 2. By symmetry, these initial conditions would be equally likely, and therefore the final results would be equally likely.
$endgroup$
The probabilities of getting various values with dice can't be proved statistically. Statistical calculations assume things about these probabilities. The probabilities are what they are because of physics and symmetry.
IIRC there is a user on here named "seven-sided die." With all due respect to this user, the ... er ... typical dice we use are either regular polyhedra or shapes with almost as much symmetry as regular polyhedra. If you have such a die with no markings or etched numbers on it, then any face is equivalent to any other face, in the sense that you can rotate the die so that face A comes on top of face B, and when you have done so, the new state of the unmarked die is indistinguishable from the old state. The new surface coincides with the old surface, the center of mass is in the same place, and so on.
This symmetry implies that if you pick up the die without paying any attention to its orientation, and then throw it, then any initial throw you do is no more or less likely than any other throw in which the die has been reoriented to have B in place of A. Even if the way you throw is not random (e.g., you always throw your d6 from a certain orientation, with 5 on top), the physics of rolling dice is that the motion is exponentially sensitive to the initial conditions, so your choice doesn't actually influence the probabilities. There are a lot of processes that are random for this reason, including weather (on long time scales) or the fall of a pencil balanced on its tip.
This sensitivity to initial conditions could fail if the die doesn't really roll well, and that would be a reason not to use four-sided dice. (Or you could just make a habit of shaking them in your hand.) But the issue would be that a player could cheat, not that the die would intrinsically favor one side over the other if the player is honest.
Sagging Rufus wrote:
Because the D4 kind of just falls into positions, does that lower my chances of rolling X on generic dice?
If you pick up the d4 without looking at it or intentionally trying to orient it in a particular way, then by symmetry, for any motion you could trace out that leads to rolling 1, you would have some other motion that would lead to rolling 2. By symmetry, these initial conditions would be equally likely, and therefore the final results would be equally likely.
edited Apr 10 at 23:11
answered Apr 10 at 23:04
Ben CrowellBen Crowell
1265
1265
add a comment |
add a comment |
$begingroup$
The "fairness" of dice can be divided into two factors. The fairness of the throw, and the fairness of the dice themselves.
If the dice themselves aren't fair then it makes a difference. So pragmatically yes there is a difference between a D4 and a D8. The more faces and the more edges the greater probability of having a geometric defect in manufacturing.
New contributor
$endgroup$
$begingroup$
Welcome to RPG.SE! Take the tour if you haven't already, and check out the help center for more guidance. Can you elaborate on your answer and support your claims by citing evidence?
$endgroup$
– V2Blast
Apr 11 at 5:10
$begingroup$
@V2Blast - For manufacturing problems see for instance youtube.com/watch?v=MRzg_M8pQms // Fair roll? - To prevent some rolling techniques is why gamblers must bounce the dice of the wall when playing craps.
$endgroup$
– MaxW
Apr 11 at 5:17
$begingroup$
Please edit that information into your answer. :)
$endgroup$
– V2Blast
Apr 11 at 5:44
add a comment |
$begingroup$
The "fairness" of dice can be divided into two factors. The fairness of the throw, and the fairness of the dice themselves.
If the dice themselves aren't fair then it makes a difference. So pragmatically yes there is a difference between a D4 and a D8. The more faces and the more edges the greater probability of having a geometric defect in manufacturing.
New contributor
$endgroup$
$begingroup$
Welcome to RPG.SE! Take the tour if you haven't already, and check out the help center for more guidance. Can you elaborate on your answer and support your claims by citing evidence?
$endgroup$
– V2Blast
Apr 11 at 5:10
$begingroup$
@V2Blast - For manufacturing problems see for instance youtube.com/watch?v=MRzg_M8pQms // Fair roll? - To prevent some rolling techniques is why gamblers must bounce the dice of the wall when playing craps.
$endgroup$
– MaxW
Apr 11 at 5:17
$begingroup$
Please edit that information into your answer. :)
$endgroup$
– V2Blast
Apr 11 at 5:44
add a comment |
$begingroup$
The "fairness" of dice can be divided into two factors. The fairness of the throw, and the fairness of the dice themselves.
If the dice themselves aren't fair then it makes a difference. So pragmatically yes there is a difference between a D4 and a D8. The more faces and the more edges the greater probability of having a geometric defect in manufacturing.
New contributor
$endgroup$
The "fairness" of dice can be divided into two factors. The fairness of the throw, and the fairness of the dice themselves.
If the dice themselves aren't fair then it makes a difference. So pragmatically yes there is a difference between a D4 and a D8. The more faces and the more edges the greater probability of having a geometric defect in manufacturing.
New contributor
New contributor
answered Apr 11 at 4:59
MaxWMaxW
1191
1191
New contributor
New contributor
$begingroup$
Welcome to RPG.SE! Take the tour if you haven't already, and check out the help center for more guidance. Can you elaborate on your answer and support your claims by citing evidence?
$endgroup$
– V2Blast
Apr 11 at 5:10
$begingroup$
@V2Blast - For manufacturing problems see for instance youtube.com/watch?v=MRzg_M8pQms // Fair roll? - To prevent some rolling techniques is why gamblers must bounce the dice of the wall when playing craps.
$endgroup$
– MaxW
Apr 11 at 5:17
$begingroup$
Please edit that information into your answer. :)
$endgroup$
– V2Blast
Apr 11 at 5:44
add a comment |
$begingroup$
Welcome to RPG.SE! Take the tour if you haven't already, and check out the help center for more guidance. Can you elaborate on your answer and support your claims by citing evidence?
$endgroup$
– V2Blast
Apr 11 at 5:10
$begingroup$
@V2Blast - For manufacturing problems see for instance youtube.com/watch?v=MRzg_M8pQms // Fair roll? - To prevent some rolling techniques is why gamblers must bounce the dice of the wall when playing craps.
$endgroup$
– MaxW
Apr 11 at 5:17
$begingroup$
Please edit that information into your answer. :)
$endgroup$
– V2Blast
Apr 11 at 5:44
$begingroup$
Welcome to RPG.SE! Take the tour if you haven't already, and check out the help center for more guidance. Can you elaborate on your answer and support your claims by citing evidence?
$endgroup$
– V2Blast
Apr 11 at 5:10
$begingroup$
Welcome to RPG.SE! Take the tour if you haven't already, and check out the help center for more guidance. Can you elaborate on your answer and support your claims by citing evidence?
$endgroup$
– V2Blast
Apr 11 at 5:10
$begingroup$
@V2Blast - For manufacturing problems see for instance youtube.com/watch?v=MRzg_M8pQms // Fair roll? - To prevent some rolling techniques is why gamblers must bounce the dice of the wall when playing craps.
$endgroup$
– MaxW
Apr 11 at 5:17
$begingroup$
@V2Blast - For manufacturing problems see for instance youtube.com/watch?v=MRzg_M8pQms // Fair roll? - To prevent some rolling techniques is why gamblers must bounce the dice of the wall when playing craps.
$endgroup$
– MaxW
Apr 11 at 5:17
$begingroup$
Please edit that information into your answer. :)
$endgroup$
– V2Blast
Apr 11 at 5:44
$begingroup$
Please edit that information into your answer. :)
$endgroup$
– V2Blast
Apr 11 at 5:44
add a comment |
Thanks for contributing an answer to Role-playing Games Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
Use MathJax to format equations. MathJax reference.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function ()
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2frpg.stackexchange.com%2fquestions%2f144936%2fdoes-the-shape-of-a-die-affect-the-probability-of-a-number-being-rolled%23new-answer', 'question_page');
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function ()
StackExchange.helpers.onClickDraftSave('#login-link');
);
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
$begingroup$
Comments are not for extended discussion; this conversation has been moved to chat.
$endgroup$
– mxyzplk♦
15 hours ago